Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the spark plug on the Derbi Boulevard?

Model: Derbi Boulevard
Part: Spark plugs

Video tutorial

To replace the spark plug installed on the Derbi Boulevard, you need to completely remove the panel located at the bottom of the under-seat compartment, immediately behind the footrest area. Once this has been removed, you can disconnect the ignition coil and unscrew the spark plug using a socket wrench.

After the old spark plug has been removed from its seat, you can insert the new one and then reconnect the coil. After the connection, you can reinstall the covering panel.


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Derbi Boulevard?
How to Replace the Exhaust on the Derbi Boulevard?
Boulevard To replace the exhaust on the Derbi Boulevard, you will need to loosen the screws that secure the exhaust end can to its housing: this is located nea…
How to Clean and Overhaul the Carburettor on a Derbi Boulevard
How to Clean and Overhaul the Carburettor on a Derbi Boulevard
Boulevard Here are the instructions to dismantle and overhaul the carburettor on the Derbi Boulevard scooter. First, place your scooter on the centre stand and…
How to Change the Engine Oil of the Suzuki Boulevard?
How to Change the Engine Oil of the Suzuki Boulevard?
Boulevard You can change the engine oil of the Suzuki Boulevard by loosening the drain plug located at the lower centre of the bike. Once the plug is removed, …

How to Replace the Clutch on a Yamaha TTR 125LE?

To replace the clutch on the Yamaha TTR 125LE, you will need to loosen the screws that secure the specific cover located on the right side of the bike, in the lower central area: once the cover has been removed, you will be able to identify the discs that make up the clutch underneath. Now loosen the screws that secure the discs so that they can all be extracted: after removal, you can insert the new clutch into its housing, securing all the discs and then covering everything with the cover to check its operation.

Watch the video!


by ScegliAuto

More videos