Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Senda 125
Part:

In today's guide video, you will see the main steps to remove and replace the cylinder head of a Derbi Senda 125. First, remove the seat and take off the fuel tank by unscrewing the bolts with an Allen key and closing the tap by turning the lever. Then, disconnect the coolant hose, allowing it to drain, and remove the spark plug cap. Now, disconnect the inlet hose for the coolant from the cylinder head and remove the head by unscrewing the bolts with a socket spanner: take out the head and extract the cylinder, as shown in the video!

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…
How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that secure the engine block to its housing, then disconnect the conn…
How to Remove the Engine from a Derbi Senda 125?
How to Remove the Engine from a Derbi Senda 125?
Senda 125 It is possible to remove the engine from the Derbi Senda 125 by taking it out of its housing, loosening the fixing screws that secure it to the respe…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos