Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform a service (oil change and oil filter) on the Derbi GPR 125

Model: Derbi Gpr 125
Part: Engine oil

Video tutorial

Discover the procedure for replacing the engine oil and oil filter while performing the regular service maintenance on the Derbi GPR 125 motorcycle. First, drain the engine oil by unscrewing the drain bolt located underneath the engine; allow the old oil to flow into a container for about ten minutes.

Next, unscrew the oil filter cover using a socket spanner; remove and replace the cartridge with a new one, then pour in the new oil with the correct specifications!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil on a Derbi GPR 125
How to Change Engine Oil on a Derbi GPR 125
Gpr 125 How to change the engine oil on a Derbi GPR 125? Follow this guide to proceed with the replacement. Position the bike on a central stand; remove the …
How do you bleed the brakes on the Derbi GPR 125?
How do you bleed the brakes on the Derbi GPR 125?
Gpr 125 To perform the brake bleeding on the Derbi GPR 125, you need to loosen the small drain valve located at each of the screws to let the oil out: you wi…
How to Replace the Exhaust on the Derbi GPR 125?
How to Replace the Exhaust on the Derbi GPR 125?
Gpr 125 You can replace the exhaust on the Derbi GPR 125 by loosening the screws that secure the exhaust end can to its housing, located near the rear swinga…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos