Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the DR F35?

Model: DR F35 MK 1 - Years 2020-2026
Part: Cabin air filter

In this tutorial we can see how to replace the cabin filter in the DR F35, a very simple and quick operation. First of all, go to the passenger side, then open the glove compartment, empty it and unscrew the two plastic screws on the sides of the compartment. Then release the end stop shock absorber, locate the long rectangular door and open it by unlocking the side clip. At this point, all that remains is to remove the old filter, clean the housing from any dirt residue, insert the replacement and reassemble everything following the reverse procedure.

Posted on 22 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to perform the routine maintenance service for the DR F35.
How to perform the routine maintenance service for the DR F35.
DR F35 (2020-2026 / MK 1) In this guide, we will look at the steps that will allow us to perform the routine maintenance service for the DR F35. First, let's open the car's ho…
Maintenance and Checks on the DR F35 LPG
Maintenance and Checks on the DR F35 LPG
DR F35 (2020-2026 / MK 1) Let's see how to maintain a DR F35 LPG: the periodic service must be carried out every 9,320 miles or one year (whichever comes first). The essential…
How to replace the pollen filter of a DR F35
How to replace the pollen filter of a DR F35
DR F35 (2020-2026 / MK 1) Let's see how to replace the pollen filter on a DR F35: the drawer is located in the back of the glove compartment, which must be removed from its se…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos