Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a DS 7

Model: DS DS 7 MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Timing belt

Video tutorial

Replacing the timing belt on a DS 7 is a relatively straightforward task to perform independently. The first step is to open the bonnet.

The second step is to remove the timing belt cover by unscrewing the screws. The third step is to loosen the tensioner.

The fourth step is to remove the crankshaft pulley and slide off the belt. Now proceed with the replacement.

The fifth step is to insert the new belt into the tensioner and fit the pulley. The sixth step is to tighten the tensioner and refit the timing belt cover.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

DS DS 7 (2020-2026 / MK 1) The presentations shown in this video are dedicated to those who want to easily and inexpensively solve problems with their vehicle or make modificat…
DS DS 7 (2020-2026 / MK 1) If you own a DS7 and want to learn how to quickly and correctly replace the cabin air filter, read this guide carefully and follow the described step…
DS DS 7 (2020-2026 / MK 1) To replace the water pump of the DS 7, you will need to lift the car so that the front right wheel is off the ground. This wheel will then need to be…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos