Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Ducati Hypermotard, you need to loosen the screws that secure the side panels located on the rear fender and covering the two exhaust terminals: you can free them from their housing by loosening the support screws and widening the connecting clamp between the terminal and the corresponding exhaust manifold. At this point, you can insert the new replacement piece into its housing, securing it with the support screws and connecting it to the corresponding exhaust manifold.

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Ducati Hypermotard?
How do you replace the exhaust pipe of the Ducati Hypermotard?
Hypermotard The replacement of the exhaust of the Ducati Hypermotard can be done by loosening the screws that secure the panel located on the right side of the m…
How to Replace the Exhaust on the Ducati Hypermotard
How to Replace the Exhaust on the Ducati Hypermotard
Hypermotard To replace the exhaust on the Ducati Hypermotard, loosen the screws that secure it to the corresponding mounts located on the right side of the bike …
How to replace the battery on the Ducati Hypermotard?
How to replace the battery on the Ducati Hypermotard?
Hypermotard To replace the battery on the Ducati Hypermotard, turn the key in the side lock of the bike, which will allow you to lift the seat. At the back of th…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos