Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Multistrada 950
Part:

In this video, we see how to disassemble the front fairing (also called the "beak") of the Ducati Multistrada 950. We remove the side covers that are snap-fit, then remove the three screws (2 side and 1 center) to remove the lower partition. We unscrew the 4 screws of the front fairing (two on each side) and carefully remove the front fairing: do not pull it forcefully, because behind it there is the temperature sensor, which is an electrical connector to disconnect. Once disconnected, we can carefully remove it. The youtuber suggests, after removing the front fairing, to treat the bodywork with a ceramic product, to protect the motorcycle from sun and external agents.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Chain of the Ducati Multistrada 950
How to Clean the Chain of the Ducati Multistrada 950
Multistrada 950 This guide briefly explains how to clean and lubricate the drive chain of the Ducati Multistrada 950, following the instructions below. First, place …
How to change the engine oil in a Ducati Multistrada 950?
How to change the engine oil in a Ducati Multistrada 950?
Multistrada 950 In this tutorial, learn how to change the engine oil in a Ducati Multistrada 950, a simple and quick operation to perform every 12 months. First, wai…
How do you set the clock on the Ducati Multistrada 950?
How do you set the clock on the Ducati Multistrada 950?
Multistrada 950 In order to set the clock of the Ducati Multistrada 950, you need to insert the ignition key into the lock and turn it to turn on the instrument pane…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos