Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter on a Ducati Hypermotard

Model: Ducati Hypermotard
Part: Air filter

Video tutorial

Remove the engine air filter on a Ducati Hypermotard. Follow this guide to replace it. Position the motorcycle on a central stand, remove the seat; unscrew all screws around and above the fuel tank; detach the fairing pieces on either side of the tank.

Open the cap and remove the air filter. Fit a new one if damaged or refit the same after cleaning it (use an air compressor).

Finally, close the air filter housing, reposition all the fairings of the tank, and remount the seat.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Ducati Hypermotard?
How to Replace the Air Filter on a Ducati Hypermotard?
Hypermotard To replace the air filter on the Ducati Hypermotard, loosen the bolts securing the fairings on the side of the tank. Then, remove the seat and the sc…
How to replace the air filter on the Ducati Hypermotard?
How to replace the air filter on the Ducati Hypermotard?
Hypermotard To replace the air filter on the Ducati Hypermotard, loosen the screws securing the seat so that it can be removed from its housing. Once the seat is…
How do you replace the engine oil of the Ducati Hypermotard?
How do you replace the engine oil of the Ducati Hypermotard?
Hypermotard The oil change of the Ducati Hypermotard can be done by loosening the drain plug of the oil pan, located in the central lower part of the motorcycle.…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos