Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil and Oil Filter Replacement for Ducati Panigale 1199R

Model: Ducati Panigale 1199r
Part: Engine oil

Video tutorial

This guide describes how to replace the engine oil and oil filter on a Ducati Panigale 1199R. Obtain 4 litres of Motul 7100 SAE 10W40 oil and an HIFLO HF159 oil filter. Position the motorcycle on the rear stand.

Start the engine, allow it to reach temperature, and then switch off. Use a 4 mm Allen key to remove the eight retaining screws from each fairing located under the engine covers. Place a container for used oil disposal under the engine.

Use a ratchet and a 17 mm socket to remove the oil drain plug located underneath the engine. Allow the oil to drain and clean the magnetic plug thoroughly.

To replace the oil filter, remove the filter cover located under the left side crankcase. Use a ratchet and a 10 mm socket to remove the two retaining screws of the cover.

Insert the new filter and the cover gaskets, then reattach the oil drain plug. Open the oil filler cap located on the right side of the crankcase.

Pour in the oil, referring to the inspection hole located at the bottom of the crankcase. Start the engine for one minute and switch off. Check the oil level.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Panigale 1199r In this tutorial, you will see how to change the engine oil in the Ducati Panigale 1199, a very simple and quick operation to perform every 12 months…
Panigale 1199r Before starting, position your Ducati Panigale on its side stand. Begin by removing the rider's seat by unscrewing the relevant fastening screws. Nex…
Panigale 1199r To replace the windscreen on a Ducati Panigale 1199R, remove the fastening screws located under the windscreen and on the fuel tank cover. Once these…

How to replace the rear shock absorber on a Ducati Scrambler?

To replace the rear shock absorber on a Ducati Scrambler, you need to loosen the bolts that secure the shock absorber to its housing: this is located between the mudguard and the rear swingarm. To remove it from its position, it will be necessary to loosen the bolts securing it at the top and bottom; this will allow you to extract the shock absorber from its seat and insert the new replacement part. After securing it with the appropriate bolts, you can check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos