Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Ducati
  4. : Panigale 1199r

Ducati Panigale 1199r - Videoguide

Ducati Panigale 1199r
How to replace the engine oil in the Ducati Panigale 1199?

In this tutorial, we can see how to replace the engine oil in the Ducati Panigale 1199, a very simple and quick operation to be carried out every 12 months. …read all…
Posted on 29 July 2023 by ScegliAuto
Ducati Panigale 1199r
How to replace the Ducati Panigale headlight bulb?

In order to replace the Ducati Panigale headlight bulb it is necessary to remove the connector using a screwdriver. The connector will be accessible from the …read all…
Posted on 8 March 2024 by ScegliAuto
Ducati Panigale 1199r
How to replace the air filter on a Ducati Panigale

Before starting, we will have to place our Ducati Panigale on the side stand. So let's start by disassembling the riding saddle, unscrewing the relative fixing …read all…
Posted on 21 February 2024 by ScegliAuto
Ducati Panigale 1199r
How do you replace the windshield of the Ducati Panigale?

To replace the windshield of the Ducati Panigale 1199R, remove the fixing screws which are located under the windshield itself and on the tank compartment. …read all…
Posted on 16 February 2024 by ScegliAuto
Ducati Panigale 1199r
Ducati Panigale 1199R engine oil and oil filter replacement

Descriptive guide for replacing the engine oil, oil filter of a Ducati Panigale 1199R. Get 4LT of Motul 7100 sae 10w40 oil, HIFLO HF159 oil filter. Place the …read all…
Posted on 13 November 2023 by ScegliAuto
Air filter (1) Light bulb (1) Engine oil (2) Windshield (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos