Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Chain, Sprocket, and Pinion on a Ducati Panigale 899

Model: Ducati Panigale 899
Part:

Video tutorial

These brief and simple steps will guide you on how to remove and replace the transmission chain, sprocket, and pinion on a Ducati Panigale 899. First, place the bike on a stand and begin by removing the lower side plastic fairing; then remove the rear wheel by undoing the central nut and sliding out the axle, as shown in the video.

At this point, you can replace the sprocket by undoing its securing screws; similarly, replace the pinion, installing the sprocket and pinion with the original gearing; then reassemble the new chain, adjusting its tension after installing the wheel.


Posted on 27 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Ducati Panigale 899
How to Replace the Battery of the Ducati Panigale 899
Panigale 899 Below, we outline the procedure and instructions to remove and replace the battery of the Ducati Panigale 899 motorcycle. First, place your motorcycl…
How to Replace the Headlight Bulb of the Ducati Panigale 899?
How to Replace the Headlight Bulb of the Ducati Panigale 899?
Panigale 899 To replace the headlight bulb of the Ducati Panigale 899, access the internal part of the front of the bike, located immediately behind the handlebar…
How to replace the front headlight bulbs in the Ducati Panigale 899?
How to replace the front headlight bulbs in the Ducati Panigale 899?
Panigale 899 In this tutorial we can see how to replace the front headlight bulbs on the Ducati Panigale 899, an extremely simple and quick operation. First of al…

Disassembly and Replacement of the Variator on the Sym Symphony ST

Here are the step-by-step instructions for disassembling and replacing the variator and belt on the Sym Symphony ST scooter, following these simple steps. First, place your scooter on the centre stand and start unscrewing the fixing screws of the transmission cover; then unscrew the nut of the fan and that of the clutch bell, subsequently removing the transmission belt, as shown in the video. At this point, also remove the variator, replacing the rollers if necessary; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos