Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Ducati Scrambler?

Model: Ducati Scrambler
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Ducati Scrambler, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then remove the relevant lower cover and place a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using a 5mm hex key, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten the replacement, reassemble everything, and add the required amount of oil through the designated upper hole.


Posted on 12 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
Scrambler The engine oil and filter on the motorcycle should be replaced at regular intervals to ensure proper engine function; here’s how to perform the routi…
Replace the Clutch on a Ducati Scrambler
Replace the Clutch on a Ducati Scrambler
Scrambler In today's tutorial video, we will see the main steps to disassemble and replace the clutch kit on the Ducati Scrambler by following these simple ste…
Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Scrambler Learn the procedure for performing the routine maintenance service by replacing the engine oil and oil filter on the Ducati Scrambler. First, place y…

How to Replace the Exhaust on a GasGas EC 250F?

To replace the exhaust on the GasGas EC 250F, loosen the bolts that secure the exhaust cover at the rear, on the right side of the bike. By loosening these bolts, you will be able to remove the cover and access the screws that attach the exhaust to its supports. Next, also loosen the bolts that connect the exhaust to the exhaust pipe: this will allow you to completely remove the old exhaust and fit the new one, which must be secured to the respective supports and the exhaust pipe.

Watch the video!


by ScegliAuto

More videos