Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the key fob for the BMW 1250 GS?

Model: BMW BMW Various
Part: Key

Video tutorial

Don't worry, replacing the battery of your motorcycle key fob is a piece of cake. Take a small flathead screwdriver and gently pry open the shell by levering it on the slot, or try to open it with your fingers.

Once inside, you will see the battery, usually a CR2032. Carefully remove the old battery and insert the new one, paying attention to the polarity, + towards the top. Close it all by pressing firmly until you hear a click. Now try to see if it works by pressing the button.

If you don't feel comfortable doing it yourself, contact an expert or a trusted workshop.


Posted on 28 March 2025 by ScegliAuto


Related tutorials

How to recharge the BMW key fob batteries with rechargeable batteries
How to recharge the BMW key fob batteries with rechargeable batteries
BMW BMW Various On some models in the BMW range, the remote controls have a rechargeable battery; this is a real attention to the environment, and we see how to rech…
How to Reset the Service Light on a BMW GS 1250
How to Reset the Service Light on a BMW GS 1250
BMW BMW Various If you have replaced the engine oil and filter on this type of motorcycle, you need to reset the service light that has illuminated on the instrument…
How to Reset the Service on the BMW GS 1250
How to Reset the Service on the BMW GS 1250
BMW BMW Various In this tutorial, learn how to reset the service indicator on this vehicle after changing the oil and performing the service. First, obtain a diagnos…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos