Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW GS 1250

Model: BMW BMW Various
Part: Warning light – error code

If you have replaced the engine oil and filter on this type of motorcycle, you need to reset the service light that has illuminated on the instrument panel. You will find the necessary instructions for this operation in the following description and also in the video. First, install the Motoscan app on your mobile phone and connect an OBD link to the OBD2 socket of the motorcycle. Once the app is connected to the OBD link, select the motorcycle model and then choose the service reset option, entering the date and the new mileage interval for the next service, and you're done.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on the BMW GS 1250
How to Reset the Service on the BMW GS 1250
BMW BMW Various In this tutorial, learn how to reset the service indicator on this vehicle after changing the oil and performing the service. First, obtain a diagnos…
How do you replace the battery of the key fob for the BMW 1250 GS?
How do you replace the battery of the key fob for the BMW 1250 GS?
BMW BMW Various Don't worry, replacing the battery of your motorcycle key fob is a piece of cake. Take a small flathead screwdriver and gently pry open the shell by …
How to reset the service light on a BMW
How to reset the service light on a BMW
BMW BMW Various The reset of the service indicator light, related to the car service on a BMW 3 Series vehicle of various generations, follows the same steps on both…

Other guides you may be interested in

    Frequently Asked Questions

    • Bmw Vari - What does the DDE light mean in BMW cars? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos