Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the main fuse and the battery in a Harley-Davidson?

Model: Harley Davidson Harley
Part: Battery

Video tutorial

No problem, removing the main fuse and the battery on a Harley is not difficult but it requires a minimum of attention. Turn everything off and remove the key. The main fuse is usually located near the battery inside a black fuse holder.

Open it and remove it gently. Now locate the battery, which is usually under the seat.

Remove the screws or the clamp holding it in place, then disconnect the negative cable first and then the positive one, to avoid shorts. Remove the battery calmly without forcing the cables.

If you need to replace it, clean the contacts before reassembling everything. If you don't feel comfortable doing this yourself, contact your trusted workshop.


Posted on 28 March 2025 by ScegliAuto


Related tutorials

How to Replace the Battery of a Harley Davidson
Harley .. Replacing the battery of a Harley Davidson is a very simple task that can be done independently. The first step is to remove the side cover.. …
How to replace the battery of a Harley Davidson
How to replace the battery of a Harley Davidson
Harley .. explain how to replace the battery of a Harley Davidson motorcycle on your own. To replace the battery, we need to use a Torx key and a flathead screwdriver... …
How to replace the battery of the Harley Davidson key
How to replace the battery of the Harley Davidson key
Harley .. explain how to replace the battery of a Harley Davidson key. To perform this operation, you will need a flathead screwdriver or a coin, and a 3V CR2032.. …

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos