Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, follow all the steps to remove and replace the clutch on a Ducati Monster S2R 1000. First, unscrew the screws on the clutch cover using an Allen key; then, remove the screws from the clutch springs as shown in the video. At this point, start taking out the pressure plate along with its shaft and the clutch discs one by one; then insert the new discs of the correct type (in this case, it is a dry clutch), and reassemble everything by applying the reverse procedure of disassembly!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch discs of the Ducati Monster S2R 1000
How to replace the clutch discs of the Ducati Monster S2R 1000
Monster S2r 1000 Today's main information will illustrate the process of disassembling and replacing the clutch discs (dry clutch) of the Ducati Monster S2R 1000 moto…
How to replace the motor oil in the Ducati Monster S2R 1000?
How to replace the motor oil in the Ducati Monster S2R 1000?
Monster S2r 1000 In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and quick operation. First of all, make …
Replacing the Air Filter on a Ducati Monster S2R 1000
Replacing the Air Filter on a Ducati Monster S2R 1000
Monster S2r 1000 In this video tutorial, you will see how to remove and replace the air filter on a Ducati Monster S2R 1000. First, remove the upper screws from the t…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos