Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Radiator Expansion Tank on Ducati 748-916-996-998

Model: Ducati 748

This video is currently unavailable

In this video tutorial, learn how to remove and replace the radiator expansion tank on a Ducati 748 two-seater, as well as on the 916-996-998 models. First, remove the fuel tank from your motorcycle by unscrewing the fastening screws of the tank and disconnecting the fuel hoses; also remove all side fairings.

Disconnect the hose from the expansion tank, allowing all the fluid to drain, and move the fork plate, as shown in the video. All that’s left is to move the ignition switch away and remove the tank, replacing it with the new one!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace and Clean the Air Filters on a Ducati 748
748 In this video, see how to remove and replace the engine air filter on a Ducati 748, two-seater version. First, remove the side fairings along with th…
How to Replace the Battery on a Ducati 748
How to Replace the Battery on a Ducati 748
748 To replace the battery on a Ducati 748, loosen the bolts securing the fairing located on the right side of the bike, just behind the front wheel. Onc…
How to Replace the Clutch on a Ducati 748
How to Replace the Clutch on a Ducati 748
748 To replace the clutch on a Ducati 748, you need to loosen the bolts securing the clutch cover located on the right side of the vehicle. Once this cov…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos