Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start by sitting on the rider's seat of your Ducati 1098. Next, insert the key into the ignition switch and turn the key to activate the instrument panel. Once done, pull the clutch lever and simultaneously press and hold the engine start button. Keep it pressed until the engine starts. Once it is running, you can release the button and the clutch of your Ducati 1098, completing the engine start procedure.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Ducati 1098?
How do you replace the battery of the Ducati 1098?
1098 It will be possible to replace the battery of the Ducati 1098 by loosening the screws that secure the covering panel on the left side of the motorcyc…
How to Replace the Air Filter on a Ducati 1098
How to Replace the Air Filter on a Ducati 1098
1098 To replace the air filter on a Ducati 1098, loosen all the screws securing the right side panel of the bike just below the fuel tank. This will allow…
Instructions for Replacing the Timing Belt on a Ducati 1098
Instructions for Replacing the Timing Belt on a Ducati 1098
1098 In this video tutorial, follow the main instructions to remove the timing belt from a Ducati 1098. First, remove the rider's seat and the fuel tank b…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos