Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati 1098

In this video tutorial, follow the main instructions to remove the timing belt from a Ducati 1098. First, remove the rider's seat and the fuel tank by unscrewing the fastening screws and disconnecting the fuel hoses and the electrical connector of the float; then unscrew all the fastening screws of the right-hand distribution cover. At this point, mark the references to correctly fit the new one, and loosen the tensioner bolt to remove the belt and replace it, as shown in the video!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Ducati 1098
How to Start a Ducati 1098
1098 Start by sitting on the rider's seat of your Ducati 1098. Next, insert the key into the ignition switch and turn the key to activate the instrument p…
How to Replace the Air Filter on a Ducati 1098
How to Replace the Air Filter on a Ducati 1098
1098 To replace the air filter on a Ducati 1098, loosen all the screws securing the right side panel of the bike just below the fuel tank. This will allow…
How to Replace the Air Filter on Ducati 1098
How to Replace the Air Filter on Ducati 1098
1098 In this tutorial, you will learn how to remove and replace the air filter on a Ducati 1098, following the instructions below. First, remove the front…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos