|
Do it yourself
| |||
| ||||
|
Model: Ducati Monster 797
In this video, we will see the main steps to remove the fuel tank of the Ducati Monster 796, as well as the 696. First, remove the rider's seat and start unscrewing all the fixing screws of the tank; these are located on the sides and the top of the tank, thus removing the plastic cover, as shown in the video. At this point, remove the three screws of the tank and disconnect the pipe; disconnect the electrical connector of the fuel level sensor to finally remove the tank!
Updated on 3 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Monster 797
Below are the steps to remove and replace the fuel tank on the Ducati Monster 797 motorcycle. First, place the bike on a stand and begin by removing …
Monster 797
In this guide, you will learn the procedure to remove and replace the starter motor on the Ducati Monster 796, following the instructions below. Firs…
Monster 797
Here are the main instructions on how to remove and replace the rear wheel or tyre of the Ducati Monster 796 in simple steps. First, place the rear s…
|
How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the motorcycle, just under the rear mudguard and above the rear swingarm. Once the upper and lower bolts of the shock absorber are loosened, it can be extracted from its housing and replaced with a new spare part. At this point, refit the new shock absorber in its housing to ensure everything functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |