Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor from the Ducati Monster 796

Model: Ducati Monster 797
Part: Starter motor

Video tutorial

In this guide, you will learn the procedure to remove and replace the starter motor on the Ducati Monster 796, following the instructions below. First, locate the starter motor under the engine, right next to the oil filter; then remove the clutch cylinder or pump to subsequently take off the entire cover and disconnect the starter motor gear.

At this point, you can remove the starter motor by unscrewing the screws and disconnecting the electrical wiring, replacing it with the new one!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Ducati Monster 796
How to Change the Engine Oil on a Ducati Monster 796
Monster 797 Regular maintenance service is essential for ensuring the longevity and proper functioning of the engine; here’s how to perform it on a Ducati Monste…
How to Change the Engine Oil in a Ducati Monster 796
How to Change the Engine Oil in a Ducati Monster 796
Monster 797 To change the engine oil in the Ducati Monster 796, loosen the drain plug located at the bottom of the bike, on the right side of the oil sump. Loose…
Removing the Fuel Tank of the Ducati Monster 796
Removing the Fuel Tank of the Ducati Monster 796
Monster 797 In this video, we will see the main steps to remove the fuel tank of the Ducati Monster 796, as well as the 696. First, remove the rider's seat and s…

How to Replace the Drive Belt on a Peugeot Elyseo 50

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos