Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Ducati Monster 796

Model: Ducati Monster 797
Part: Engine oil

Video tutorial

Regular maintenance service is essential for ensuring the longevity and proper functioning of the engine; here’s how to perform it on a Ducati Monster 796. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew the oil filter cartridge, as shown in the video.

At this point, install the new oil filter and top up with new oil, pouring in the correct amount!


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Ducati Monster 796
How to Change the Engine Oil in a Ducati Monster 796
Monster 797 To change the engine oil in the Ducati Monster 796, loosen the drain plug located at the bottom of the bike, on the right side of the oil sump. Loose…
Removing the Starter Motor from the Ducati Monster 796
Removing the Starter Motor from the Ducati Monster 796
Monster 797 In this guide, you will learn the procedure to remove and replace the starter motor on the Ducati Monster 796, following the instructions below. Firs…
How to Replace the Clutch on a Ducati Monster 796
How to Replace the Clutch on a Ducati Monster 796
Monster 797 To replace the clutch on a Ducati Monster 796, you need to loosen the bolts securing the cover on the right side of the bike, just below the exhaust.…

How to Replace the Drive Belt on a Peugeot Elyseo 50

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos