Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Ducati Monster 796

Model: Ducati Monster 797
Part: Clutch

Video tutorial

To replace the clutch on a Ducati Monster 796, you need to loosen the bolts securing the cover on the right side of the bike, just below the exhaust. Once the cover is opened, you will have access to the clutch by unscrewing all the bolts holding the plates together.

By loosening the bolts, you can remove all the clutch plates and replace them with a new spare part. Once the new clutch is installed, secure it by tightening the fastening screws again.

At the end of the installation, close the cover.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Replacing the Brake and Clutch Levers on the Ducati Monster 796
Replacing the Brake and Clutch Levers on the Ducati Monster 796
Monster 797 In this short video, you will see how to remove and replace the front brake and clutch levers on a Ducati Monster 796, as well as on other models wit…
Removing the Starter Motor from the Ducati Monster 796
Removing the Starter Motor from the Ducati Monster 796
Monster 797 In this guide, you will learn the procedure to remove and replace the starter motor on the Ducati Monster 796, following the instructions below. Firs…
How to Replace the Rear Wheel on the Ducati Monster 796
How to Replace the Rear Wheel on the Ducati Monster 796
Monster 797 Here are the main instructions on how to remove and replace the rear wheel or tyre of the Ducati Monster 796 in simple steps. First, place the rear s…

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos