Do it yourself
Frequently asked questions about cars and motorcycles
To replace the headlight bulb on a Ducati Scrambler, loosen the screws that secure the headlight to its housing. These screws are located at the rear and are accessible from the inside of the fork. By unscrewing these screws, you can remove the headlight and disconnect the connectors at the back. This allows you to extract the bulb from inside the headlight and replace it. Once the replacement is complete, reconnect the headlight and secure it back to its housing with the screws.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Scrambler In order to replace the front turn signal bulb of the Ducati Scrambler, you need to loosen the screws that secure the corresponding headlight on the …
Scrambler To replace the headlight bulb on the Triumph Scrambler, loosen the two screws that secure the front optical unit on the sides. Once these screws are …
Scrambler To replace the air filter of the Ducati Scrambler, loosen the bolts securing the filter box, located at the front of the bike just behind the front w…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos