Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Ducati Streetfighter V4 S, loosen the screws located at the central lower part of the bike to remove the corresponding protective plate. Once this plate is removed, you can unscrew the bolts that secure the exhaust to the respective supports, both at the lower and upper parts of the exhaust system: you will also need to unscrew the one that secures the clamp connecting the exhaust to the rest of the system. This will allow you to insert the new exhaust, securing and connecting it properly.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Ducati Streetfighter V4 S?
How to Replace the Exhaust on a Ducati Streetfighter V4 S?
Streetfighter V4 S To replace the exhaust on the Ducati Streetfighter V4 S, loosen the screws located at the central lower part of the bike to remove the corresponding …
How do you replace the exhaust on the Ducati Streetfighter V4 S?
How do you replace the exhaust on the Ducati Streetfighter V4 S?
Streetfighter V4 S The exhaust installed on the Ducati Streetfighter V4 S can be replaced by loosening the screws located at the central lower part of the motorcycle, a…
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
Streetfighter V4 S To replace the front brake pads on a Ducati Streetfighter V4 S, loosen the bolts that secure the brake caliper to detach it from the brake disc. Once…

How to Remove the Fairings of the KTM EXC 500

In this brief and simple guide, you will find instructions to remove and replace all the plastic fairings of the KTM EXC 500. First, place your bike on a stand and start unscrewing the screws of the plastic fairings located on the sides; then remove the plastic cover of the fuel tank by unscrewing the side screws, followed by the removal of the front mudguard and the rear tail, as shown in the video. At this point, disconnect any wiring from the plastics, replacing them if necessary, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos