Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Dink
Part: Brake pads

In order to replace the rear brake pads of the Kymco Dink R 150, you will need to loosen the screws that hold the brake caliper to the corresponding disk: to remove the caliper, you will need to remove the exhaust terminal first. Once this is done, you will need to remove the pin that locks the pads inside the caliper: this way, the new pads can be inserted into the caliper and secured with the appropriate screws. After installing the caliper, you can verify that everything works properly with the new components.

Posted on 11 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Kymco Dink 150
How to Change the Engine Oil of the Kymco Dink 150
Dink In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place…
How to set the clock of the Kymco Dink R 150
How to set the clock of the Kymco Dink R 150
Dink Let's see the process of how to change the time on the display of the instrument panel of the Kymco Dink R 150. First, we put the scooter on the stan…
How to reset the Oil Service light on the Kymco Dink R 150?
How to reset the Oil Service light on the Kymco Dink R 150?
Dink To reset the Oil Service light on the Kymco Dink R 150, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos