Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Dink
Part: Engine oil

You can perform the engine oil change on the Kymco Dink 150 by loosening the drain plug of the oil sump, which is located at the central lower part of the vehicle. Once this plug is unscrewed, all the used oil can be drained into a container placed in the lower area of the scooter. At this point, you can also remove the oil filter located in the same position, in order to replace it with a new one; then you can proceed with topping up by pouring the necessary amount of engine oil through the filler located on the left side of the scooter.

Posted on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Kymco Dink 150
How to Change the Engine Oil of the Kymco Dink 150
Dink In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place…
How do you replace the engine oil of the Kymco Dink 150?
How do you replace the engine oil of the Kymco Dink 150?
Dink In order to replace the engine oil of the Kymco Dink 150, you will need to loosen the drain plug located in the central lower part of the vehicle: on…
How to Change the Transmission Oil in a Kymco Dink 150 Scooter?
How to Change the Transmission Oil in a Kymco Dink 150 Scooter?
Dink This tutorial shows how to change the transmission oil in a Kymco Dink 150 scooter, a very simple and quick operation. First, ensure the engine is su…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos