Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Kymco Dink 150

Model: Kymco Dink
Part: Engine oil

Video tutorial

In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place the scooter on the centre stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; clean the drain plug of any metallic residues, then unscrew the filler cap. At this point, pour in the new engine oil of the correct type, topping up to the appropriate level; start the engine and top up further if necessary!


Posted on 23 May 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Kymco Dink 150?
How to replace the engine oil in the Kymco Dink 150?
Dink You can perform the engine oil change on the Kymco Dink 150 by loosening the drain plug of the oil sump, which is located at the central lower part o…
How do you replace the engine oil of the Kymco Dink 150?
How do you replace the engine oil of the Kymco Dink 150?
Dink In order to replace the engine oil of the Kymco Dink 150, you will need to loosen the drain plug located in the central lower part of the vehicle: on…
How do you replace the rear brake pads of the Kymco Dink R 150?
How do you replace the rear brake pads of the Kymco Dink R 150?
Dink In order to replace the rear brake pads of the Kymco Dink R 150, you will need to loosen the screws that hold the brake caliper to the corresponding …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos