Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Vespa LX?

Model: Piaggio Vespa 125 Lx
Part: Tail light

Video tutorial

To replace the rear light on a Vespa LX, loosen the two screws that secure the light unit within its housing. Once these screws are loosened, you can pull the unit from its housing, also disconnecting the connector inside.

At this point, unscrew the screws securing the trim around the light, removing it as well and installing a new one. Now, connect the internal connectors to the new light and insert it into the designated housing, securing everything with the screws.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX
How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX
Vespa 125 Lx To replace the headlamp bulb on a Piaggio Vespa 125 LX, loosen the screw that secures the headlamp in its housing so that it can be fully removed. On…
How to Replace the Rear Shock Absorber on the Piaggio Vespa 125 LX?
How to Replace the Rear Shock Absorber on the Piaggio Vespa 125 LX?
Vespa 125 Lx To replace the rear shock absorber on the Piaggio Vespa 125 LX, you need to remove the plastic cover located at the rear of the scooter, near the fue…
How to Change the Gear Oil on a Vespa 125 LX?
How to Change the Gear Oil on a Vespa 125 LX?
Vespa 125 Lx To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the tra…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos