Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on the Piaggio Vespa 125 LX?

Model: Piaggio Vespa 125 Lx
Part: Shocks

Video tutorial

To replace the rear shock absorber on the Piaggio Vespa 125 LX, you need to remove the plastic cover located at the rear of the scooter, near the fuel filler opening. Once this cover has been removed, you can access the nut that secures the shock absorber at the rear, which needs to be loosened.

Then, loosen the nut that secures the shock absorber at the bottom, near the rear wheel. This will allow you to completely remove it and replace it with a new spare part.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to replace the front shock absorber on a Piaggio Vespa 125 LX?
How to replace the front shock absorber on a Piaggio Vespa 125 LX?
Vespa 125 Lx To replace the front shock absorber on a Piaggio Vespa 125 LX, loosen the bolts that secure the front wheel of the scooter, removing it from its hous…
Where are the fuses on a Piaggio Vespa LX 125?
Where are the fuses on a Piaggio Vespa LX 125?
Vespa 125 Lx The fuses on a Piaggio Vespa LX 125 are located at the rear of the scooter. To access them, open the underseat compartment using the designated key. …
How to Replace the Exhaust on a Piaggio Vespa LX 125
How to Replace the Exhaust on a Piaggio Vespa LX 125
Vespa 125 Lx The procedure for replacing the exhaust on the Piaggio Vespa LX 125 involves loosening the screws that secure the exhaust tip to its housing: this wi…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos