Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses on a Piaggio Vespa LX 125?

Model: Piaggio Vespa 125 Lx
Part: Fuse box

Video tutorial

The fuses on a Piaggio Vespa LX 125 are located at the rear of the scooter. To access them, open the underseat compartment using the designated key. Once the compartment is open, loosen the cover at the rear to access the underlying fuses.

Here, you can identify the fuses for the instrument cluster, fuel pump, front headlamp, etc. Each fuse can be replaced with another of the same amperage.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Where is the Spark Plug on a Piaggio Vespa 125 LX Scooter?
Where is the Spark Plug on a Piaggio Vespa 125 LX Scooter?
Vespa 125 Lx In this video, you can see where the spark plug is located on a Piaggio Vespa 125 LX scooter and how to proceed if you need to replace it, a very sim…
Battery replacement for Piaggio Vespa 125 LX
Battery replacement for Piaggio Vespa 125 LX
Vespa 125 Lx In a few simple steps, we will see the process of disassembling and replacing the battery of the Piaggio Vespa 125 LX. First, we put the scooter on t…
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
Vespa 125 Lx This guide shows the steps to remove and replace the rear wheel of the Piaggio Vespa LX 125 scooter, following the instructions below. First, place t…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos