Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows the steps to remove and replace the rear wheel of the Piaggio Vespa LX 125 scooter, following the instructions below. First, place the scooter on the centre stand and start by removing the metal split pin from the wheel nut using pliers; then use a socket wrench with an extension to unscrew and remove the nut, as shown in the video. At this point, remove the wheel, replacing the tyre if necessary; then refit the rear wheel, and subsequently refit the exhaust silencer!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of a Vespa LX 125
How to Remove the Front Wheel of a Vespa LX 125
Vespa 125 Lx To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a ba…
How to Replace the Rear Shock Absorber on the Piaggio Vespa 125 LX?
How to Replace the Rear Shock Absorber on the Piaggio Vespa 125 LX?
Vespa 125 Lx To replace the rear shock absorber on the Piaggio Vespa 125 LX, you need to remove the plastic cover located at the rear of the scooter, near the fue…
How to Replace the Transmission on the Piaggio Vespa LX 125?
How to Replace the Transmission on the Piaggio Vespa LX 125?
Vespa 125 Lx To replace the transmission on the Piaggio Vespa LX 125, loosen the screws securing the protective cover located on the left side of the scooter near…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos