Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fairings on the Yamaha T-MAX 530 Scooter?

Model: Yamaha T Max 530
Part:

Video tutorial

In this tutorial, you will see how to remove the fairings on the Yamaha T-MAX 530 scooter, a simple but rather lengthy operation. First, ensure that the key is not inserted, then start by unclipping the front panel and removing the entire headlight assembly.

Next, remove the two front panels, move to the side of the scooter, and undo each securing bolt of the side fairings. Finally, open the seat, undo the bolts of the support handle, remove the lower screws, and separate the entire block containing the rear light.

To install the replacements, simply follow the reverse procedure.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on the Yamaha T-MAX 530 Scooter?
How to Reset the Oil Service on the Yamaha T-MAX 530 Scooter?
T Max 530 .. see how to reset the service on the Yamaha T-MAX 530 scooter, a very simple and quick operation to perform only after completing the required scheduled.. …
How to Change the Engine Oil on a Yamaha TMAX 530 Scooter?
How to Change the Engine Oil on a Yamaha TMAX 530 Scooter?
T Max 530 .. Changing the engine oil on a Yamaha TMAX 530 scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until.. …
How to set the clock on the Yamaha T Max 530
How to set the clock on the Yamaha T Max 530
T Max 530 .. display of the instrument panel of the Yamaha T Max 530 scooter. First, put the scooter on the stand and start the instrument panel; then press and hold.. …

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos