Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati 996
Part: Clutch

To replace the clutch on the Ducati 996, you need to loosen the screws that secure the cover of the casing located on the right side of the bike, in its lower central part: by loosening these screws, it will be possible to slide out all the discs that make up the clutch from their housing, loosening the bolts that secure them. At this point, you can insert the new clutch into its seat; it should be secured with the screws removed earlier and covered with the corresponding casing. After installation, check that everything functions correctly.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Ducati 996?
How to Change the Engine Oil of the Ducati 996?
996 To change the engine oil of the Ducati 996, loosen the drain plug of the oil reservoir located on the casing at the lower part of the right side of t…
How to Check the Engine Oil Level on Ducati 996
How to Check the Engine Oil Level on Ducati 996
996 This guide shows how to check the engine oil level on the Ducati 996. First, check the oil level before fully using the engine; otherwise, if the eng…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos