Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, follow these instructions to remove and replace the spark plugs on your Ducati Scrambler in simple and quick steps. First, place the motorcycle on its centre stand and start by disconnecting the connectors from the two spark plugs; then use a socket spanner with an extension to unscrew and remove the spark plugs from the cylinder head, as shown in the video. At this point, install the correct spark plugs of the right type and with the same thread pitch, screw them in by hand and then gently tighten with the spanner, finally reconnect the spark plug connectors!

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Ducati Scrambler
How to Replace the Spark Plugs on a Ducati Scrambler
Scrambler In this video tutorial, you will see the main instructions for removing and replacing the spark plugs in the engine of the Ducati Scrambler, in simpl…
How to Replace the Chain and Sprocket on the Ducati Scrambler
How to Replace the Chain and Sprocket on the Ducati Scrambler
Scrambler Follow these main instructions to remove and replace the chain and sprocket on your Ducati Scrambler motorcycle. First, place your bike on the centre…
How to Replace the Handlebars on the Ducati Scrambler
How to Replace the Handlebars on the Ducati Scrambler
Scrambler This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. …

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos