Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yamaha R3
Part: Clutch

To replace the clutch on the Yamaha R3, you need to loosen the screws securing the cover on the right side of the vehicle. Once the screws are loosened, you can completely detach the cover and access the underlying clutch. The clutch can be removed from its housing by loosening its fixing screws and sliding out all the discs that comprise it; once the old clutch has been removed, you can insert the new one, ensuring everything functions correctly and finally covering it with the corresponding side cover.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on the Yamaha R3?
How to Replace the Headlight Bulbs on the Yamaha R3?
Yamaha R3 As shown in this tutorial, replacing the headlight bulbs on the Yamaha R3 is an extremely simple and quick task. Before proceeding, ensure that the k…
How to Replace the Engine Oil in the Yamaha R3
How to Replace the Engine Oil in the Yamaha R3
Yamaha R3 In this tutorial, you will see how to replace the engine oil in the Yamaha R3, a very simple and quick operation. First, wait for the engine to cool …
How to replace the battery in the Yamaha R3?
How to replace the battery in the Yamaha R3?
Yamaha R3 In this tutorial, we can see how to replace the battery in the Yamaha R3, an extremely simple and quick operation. First of all, make sure that the k…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos