Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Access 125
Part: Clock

To set the clock on the Suzuki Access 125, you need to turn on the instrument panel by turning the ignition key in the corresponding block: once the instrument panel is turned on, you can press and hold both buttons on the left of the display. This will allow the clock to flash and you can change the hours by repeatedly pressing the SEL button; to change the minutes, you will need to do the same operation by pressing the MODE button. After the adjustment, you can return to the initial screen to confirm.

Posted on 10 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Suzuki Access 125 Scooter?
How to Set the Time on a Suzuki Access 125 Scooter?
Access 125 In this tutorial, you can see how to set the time on a Suzuki Access 125 scooter, a very simple and quick operation, to be done for example after dis…
How to Set the Time on the Suzuki Access 125 Scooter?
How to Set the Time on the Suzuki Access 125 Scooter?
Access 125 In this tutorial, you will see how to set the time on the Suzuki Access 125 scooter, a very simple and quick operation to perform, for example, after…
How to set the time on the Suzuki Access 125 scooter?
How to set the time on the Suzuki Access 125 scooter?
Access 125 In this tutorial, you will see how to set the time on the Suzuki Access 125 scooter, an extremely simple and quick operation, to be done, for example…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos