Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ducati Hypermotard 950 SP?

Model: Ducati Hypermotard
Part: Headlight bulb

Video tutorial

In this tutorial, you will see how to replace the front headlamp bulb on a Ducati Hypermotard 950 SP, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, remove the front fairing by unscrewing the relevant fixing screws with a 4mm and a 5mm hex key. Next, unscrew the screws of the headlamp, detach it from the bracket, and disconnect the power connector. At this point, open the large rear cap, unclip the metal clip, and remove the old bulb.

To fit the replacement and reassemble everything, simply follow the reverse procedure.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb in the Ducati Hypermotard 821?
How to replace the headlight bulb in the Ducati Hypermotard 821?
Hypermotard In this tutorial, we can see how to replace the headlight bulb in the Ducati Hypermotard 821, an extremely simple and quick operation. First of all, …
How to Replace the Headlight Bulb on a Ducati Hypermotard
How to Replace the Headlight Bulb on a Ducati Hypermotard
Hypermotard In a few simple steps, follow the instructions to remove and replace the headlight bulb on your Ducati Hypermotard. First, place the motorcycle on a …
How to Replace the Front Headlamp Bulb on a Ducati Hypermotard?
How to Replace the Front Headlamp Bulb on a Ducati Hypermotard?
Hypermotard To replace the front headlamp bulb on the Ducati Hypermotard, loosen the two screws located on the sides of the front fairing. This will allow you to…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos