Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on a Ducati Multistrada 1000DS, loosen the screws securing the seat to its housing and remove it completely. Next, detach the side covers of the fuel tank so that all screws are visible. By loosening these screws and disconnecting various hoses and connectors, you can remove the tank from its position and access the underlying filter; this can be released from its housing by unscrewing the securing screws and replacing it with a new one. After replacement, reassemble all components that were removed.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Ducati Multistrada V4S
How to Change the Engine Oil and Oil Filter on the Ducati Multistrada V4S
Multistrada This guide explains how to perform routine maintenance on the Ducati Multistrada V4S by changing the engine oil and oil filter. First, place the bike…
How to Replace the Air Filter on the Ducati Multistrada?
How to Replace the Air Filter on the Ducati Multistrada?
Multistrada To replace the air filter on the Ducati Multistrada, you need to remove the two fairings located on the left side of the bike, just below the handleb…
How to Service the Ducati Multistrada 1200
How to Service the Ducati Multistrada 1200
Multistrada In this video tutorial, follow the instructions to replace the engine oil along with the oil filter, completing the regular service maintenance on a …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos