Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front wheel of the Ducati Multistrada

Model: Ducati Multistrada
Part: Wheel

Video tutorial

Today, we will go through the steps to remove and replace the front wheel of the Ducati Multistrada motorcycle. First, place your motorcycle on the centre stand and start unscrewing the fixing bolts of the front brake calipers, removing them from the discs; then unscrew the central axle of the front wheel, sliding the front wheel off as shown in the video.

At this point, you can replace the tyre or the front brake discs if necessary; reassemble and adjust the front wheel properly, following the video tutorial to the end!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of the Ducati Multistrada
How to Remove the Front Wheel of the Ducati Multistrada
Multistrada The procedure for removing and replacing the front wheel or tyre of the Ducati Multistrada is quite simple. First, place the motorcycle on the centre…
How to Remove the Rear Wheel on the Ducati Multistrada 1200
How to Remove the Rear Wheel on the Ducati Multistrada 1200
Multistrada In this tutorial, you will learn how to remove the rear wheel on the Ducati Multistrada 1200, a simple and quick operation. First, go to the right si…
How to Replace the Battery of the Ducati Multistrada
How to Replace the Battery of the Ducati Multistrada
Multistrada Today's guide will illustrate the instructions to dismantle and replace the battery of the Ducati Multistrada, following these simple steps. First, p…

How to Change the Engine Oil on a Kymco Xtown 300?

To change the engine oil on a Kymco Xtown 300, loosen the drain plug of the oil reservoir, located at the central lower part of the bike: once loosened, you can collect the engine oil in a suitably positioned container. After all the oil has drained, you can also remove the oil filter from underneath and replace it with a new spare part; then, top up by adding the new oil through the filler located on the right side of the bike, near the exhaust.

Watch the video!


by ScegliAuto

More videos