Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to dismantle the engine of the Royal Enfield Classic 500, you need to loosen the screws that secure the block to its housing: once this has been released, you can disconnect the connectors and also remove the appropriate manifolds. This way you can unscrew the screws that secure the cylinders, so that they can be removed to access the pistons: by disconnecting them from the connecting rods and also removing the connecting rods from the crankshaft, you can access all the other internal components so that they can be completely replaced.

Posted on 30 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plug from a Royal Enfield Classic 500
How to Remove the Spark Plug from a Royal Enfield Classic 500
Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
Replacing the Air Filter in the Royal Enfield Classic 500
Replacing the Air Filter in the Royal Enfield Classic 500
Classic 500 Let’s discover the steps to disassemble and replace the engine air filter in the Royal Enfield Classic 500. First, place your motorcycle on the centr…
Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500
Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500
Classic 500 This guide will show you the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Royal Enfield Classic …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos