Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the air filter of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the triangular panel on the right side of the motorcycle: once this panel has been detached, you can remove the filter located inside so that it can be replaced with a new spare part. Once the new filter has been inserted, you can close the filter box again, securing the panel with the screws and checking that everything works correctly even after the replacement.

Posted on 30 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Interceptor 650 In order to replace the air filter of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the triangular cover on the left s…
Interceptor 650 As shown in this tutorial, replacing the air filter in the Royal Enfield Interceptor 650 is an extremely simple and quick operation. First, wait for …
Interceptor 650 Yes, the user manual for the Royal Enfield Interceptor 650, to be consulted for performing routine maintenance and any repairs, is mainly available i…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos