Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in this tutorial, replacing the air filter in the Royal Enfield Interceptor 650 is an extremely simple and quick operation. First, wait for the engine to cool down, then remove the rider's seat and unscrew the bolt located on the upper left edge. Next, separate the side panel from the frame, unscrew the three additional bolts, and remove the cover of the filter box. At this point, you can extract the old filter, clean the inside of the housing from any debris, and insert the replacement. To reassemble everything, simply follow the reverse procedure.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Royal Enfield Interceptor 650?
How do you replace the air filter of the Royal Enfield Interceptor 650?
Interceptor 650 In order to replace the air filter of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the triangular cover on the left s…
How do you replace the air filter of the Royal Enfield Interceptor 650?
How do you replace the air filter of the Royal Enfield Interceptor 650?
Interceptor 650 In order to replace the air filter of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the triangular panel on the right …
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
Interceptor 650 The replacement of the exhaust of the Royal Enfield Interceptor 650 can be done by loosening the screws on the appropriate supports located on the le…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos