Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the engine oil in the Royal Enfield Hunter 350, a very simple and quick operation. First, let's make sure that the engine is cool enough to operate safely, then we position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket wrench. Next, let all the oil in the system drain out, open the filter cap with an 8mm wrench, and clean it of any dirt residues. At this point, all that's left is to reassemble everything and pour in the necessary amount of oil through the designated upper hole.

Posted on 10 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Royal Enfield Hunter 350?
How to change the engine oil in the Royal Enfield Hunter 350?
Hunter 350 .. In this tutorial, we can see how to replace the engine oil in the Royal Enfield Hunter 350, a very simple and quick operation. First.. …
How to replace the engine oil in the Royal Enfield Hunter 350?
How to replace the engine oil in the Royal Enfield Hunter 350?
Hunter 350 .. In this tutorial we can see how to replace the engine oil in the Royal Enfield Hunter 350, an extremely simple and quick operation... …
How to replace the front headlight on the Royal Enfield Hunter 350?
How to replace the front headlight on the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the front headlight on the Royal Enfield Hunter 350, an extremely simple and quick operation. First, let'…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos