Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Royal Enfield Interceptor 650?

Model: Enfield Interceptor 650
Part: Engine oil

In this tutorial, you will see how to change the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain hole bolt and unscrew it using a 13mm socket. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the required amount of oil through the designated upper hole.

Posted on 30 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Royal Enfield Interceptor 650?
How to replace the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of al…
How to Change the Engine Oil in the Royal Enfield Interceptor 650?
How to Change the Engine Oil in the Royal Enfield Interceptor 650?
Interceptor 650 .. In this tutorial, you will learn how to change the engine oil in the Royal Enfield Interceptor 650, a very simple and quick operation... …
How to replace the engine oil in the Royal Enfield Interceptor 650?
How to replace the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial we can see how to replace the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of all…

How to replace the exhaust on a Husaberg FS 570?

To replace the exhaust on the Husaberg FS 570, loosen the screws that secure the side protection panel of the rear mudguard. Once this panel is removed, you will be able to locate the screws that secure the supports positioned near the exhaust. When the screws of these supports are loosened, proceed to widen the connecting clamp that joins the end pipe to the collector; this will allow you to completely remove the old exhaust and insert the new one along with all the removed parts.

Watch the video!


by ScegliAuto

More videos