Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To carry out this quick maintenance, you will only need a cross-head screwdriver and, of course, a replacement bulb. As shown in the video, unscrew the two screws located under the front headlamp, slightly off to the side (let's say at the lower corners). After completing this simple step, you can pull the front headlamp out of its housing, disconnect the connector and the wire. Position the headlamp where you want it and remove the rear rubber cover, then open the metal clip and extract the bulb. Insert the new bulb and proceed in reverse order.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Royal Enfield Meteor 350
How to Replace the Headlight Bulb on a Royal Enfield Meteor 350
Meteor 350 In this video tutorial, you will learn how to disassemble and replace the headlight bulb on a Royal Enfield Meteor 350, following the instructions be…
How to replace the headlight bulb on the Royal Enfield Meteor 350?
How to replace the headlight bulb on the Royal Enfield Meteor 350?
Meteor 350 As shown in this tutorial, replacing the headlight bulb on the Royal Enfield Meteor 350 is an extremely simple and quick operation. First, ensure tha…
How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350?
How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350?
Meteor 350 This tutorial shows how to replace the front headlamp bulb on a Royal Enfield Meteor 350, a very simple and quick operation. First, ensure that the k…

How to adjust the valve clearance on the Moto Guzzi V85TT

Valve adjustment is very important to ensure the proper functioning of the engine; by following the appropriate instructions, it is indeed possible to adjust the valve clearance of the Moto Guzzi V85TT by yourself. First, put the motorcycle on the center stand and start by removing the cylinder head cover, unscrewing all the fixing screws; then use a feeler gauge to measure the valve clearance, adjusting it according to the instructions in the motorcycle's user manual, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos