Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you start, position your Royal Enfield Classic 350 upright using the appropriate motorcycle stand. Before proceeding with the removal of the used engine oil, it is necessary to run the engine for a few minutes. Then, start by unscrewing and removing the lower oil drain nut. This will allow the engine oil to drain out. After that, re-screw the lower nut, and then unscrew and remove the upper filler cap. At this point, using a funnel, pour in the new engine oil, and finally re-screw the filler cap. Once you have completed this step, you will have finished the oil change.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Royal Enfield Classic 350?
How to Change the Engine Oil in a Royal Enfield Classic 350?
Enfield Classic In this tutorial, see how to change the engine oil in a Royal Enfield Classic 350, a very simple and quick operation to perform approximately every 1…
How to change the engine oil in the Royal Enfield Classic 500?
How to change the engine oil in the Royal Enfield Classic 500?
Enfield Classic In this tutorial, you will see how to change the engine oil in the Royal Enfield Classic 500, a very simple and quick operation to be performed every…
How to Replace the Battery in the Royal Enfield Classic 350?
How to Replace the Battery in the Royal Enfield Classic 350?
Enfield Classic Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Loca…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos