Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will see in this video tutorial how to remove and replace the speedometer cable on a Royal Enfield Classic 350 motorcycle. First, place the bike on its centre stand and start by disconnecting the speedometer wiring from the front wheel; then remove the front lamp by unscrewing the screw located at the top to completely disconnect the cable from the speedometer, as shown in the video. At this point, feed the new speedometer cable through, securing it properly to the wheel; then check the operation of the speedometer!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speedometer Cable on the Royal Enfield Classic 350
How to Replace the Speedometer Cable on the Royal Enfield Classic 350
Classic 350 Today, this guide provides instructions on how to remove and replace the speedometer cable on the Royal Enfield Classic 350 motorcycle. First, place …
Replacing the Speedometer on the Royal Enfield Classic 350 - 500
Replacing the Speedometer on the Royal Enfield Classic 350 - 500
Classic 350 In this guide, you will learn how to remove and replace the speedometer on the Royal Enfield Classic 350, as well as the 500 and most models from the…
How to Replace the Clutch Cable on the Royal Enfield Classic 350
Classic 350 In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the c…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos