Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Air Filter of the Ktm 690 Enduro

Model: Ktm 690 Enduro R
Part: Air filter

Video tutorial

In this brief and simple guide, follow the procedure to remove and replace the engine air filter of the Ktm 690 Enduro. First, remove the rider's seat and then unscrew the screws of the air filter cover located under the fairing, as shown in the video.

At this point, remove the filter cartridge and replace it with the new one, ensuring it is inserted the correct way; then refit the filter box cover and reinstall the fairing and rider's seat, following the video tutorial to the end!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Service the KTM 690 Enduro R
How to Service the KTM 690 Enduro R
690 Enduro R In this video, you will see the main steps to replace the engine oil and oil filter while performing the regular service on the KTM 690 Enduro R. Fir…
How to Change the Engine Oil on a KTM 690 Enduro R
How to Change the Engine Oil on a KTM 690 Enduro R
690 Enduro R To change the engine oil on the KTM 690 Enduro R, you need to loosen the drain plug of the oil sump, which is located at the front bottom of the bike…
How to Set the Time on the KTM Enduro 690 R
How to Set the Time on the KTM Enduro 690 R
690 Enduro R In this new guide dedicated to your KTM Enduro 690 R, you will learn how to manually set the correct time on the display. First, insert the key and t…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos