Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the KTM 690 Enduro R

Model: Ktm 690 Enduro R
Part: Engine oil

Video tutorial

In this video, you will see the main steps to replace the engine oil and oil filter while performing the regular service on the KTM 690 Enduro R. First, drain the engine oil by unscrewing the drain plug located under the engine; then, unscrew the screws of the oil filter cover using a socket spanner, removing and replacing the cartridge.

Finally, insert the new filter and pour in the correct type of engine oil, filling to the maximum level!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
690 Enduro R In today's video, we will see step-by-step instructions to perform the service, which includes the routine maintenance oil change and oil filter repl…
How to remove the battery on a KTM 690 Enduro?
How to remove the battery on a KTM 690 Enduro?
690 Enduro R In this tutorial, we will see how to replace the battery on a KTM 690 Enduro, a very simple and quick operation. First, ensure the key is not inserte…
How to replace the levers on a KTM 690 Enduro R
How to replace the levers on a KTM 690 Enduro R
690 Enduro R To replace the levers on a KTM 690 Enduro R, disconnect the cables connected to the respective levers by loosening the bolts at the end of each cable…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos